基于NPP-VIIRS夜间灯光数据的山西省GDP空间化模拟

选取山西省为研究对象，以美国国家极轨合作仪件-可见红外成像辐射计套件（NPP-VIIRS）夜间灯光数据、GDP统计数据等为数据源，构建GDP空间化拟合模型，建立山西省GDP密度图，据此研究山西省经济的空间差异性。通过对NPP-VIIRS夜间灯光数据的空间化处理，提取灯光指数，并将其与GDP进行回归拟合，建立最佳回归模型，得到GDP密度拟合图；利用县级GDP数据进行线性纠正，从而提高GDP的模拟精度。结果表明：（1）NPP-VIIRS夜间灯光数据与GDP的相关性较高，可用于山西省GDP模拟；（2）与GDP分区建模相比，GDP整体建模的精度更高；（3）山西省GDP的空间分布整体呈由城市中心逐渐向周边辐射的特点，构成GDP过渡带。     

基于现场可编程门阵列单探测器复合轴控制技术

为了解决空间激光通信系统中单探测器复合轴结构的粗精解耦难题,通过分析二维关联控制矩阵,得出粗精跟踪解耦的必要条件,提出了一种单探测器复合轴结构的工作方式.在跟踪过程中,相机直接配合子轴执行器完成精跟踪工作,而主轴的跟踪信息由子轴的角度偏转器来提供,同时所有的图像处理算法、位置检测算法、以及粗精伺服控制算法都在现场可编程门阵列中实现,完成了系统的轻小型化设计.实验搭建了测试系统,并对现场可编程门阵列硬件和系统跟踪性能进行测试,结果表明单探测器复合控制系统可以实现跟踪准确度优于3μrad,为工程化奠定了良好的基础.     

地球静止轨道远程交会过程导航性能评估

远程交会是静止轨道共位卫星自主定点置入的关键途径。针对远程交会过程中大距离跨度下相对运动模型的误差信号特性,理论推导了误差的传递机理,给出了相对导航EKF算法期望及噪声特性的定量分析模型。研究表明,确定距离区间存在最优过程噪声量级及其对应的最优滤波性能,且滤波误差与交会距离正相关,可作为全局最优滤波器的定量设计依据,解决了静止轨道远程交会过程EKF导航算法性能的量化评估问题。仿真表明,分析结论正确,相对速度滤波误差全程优于0.005 m/s(1σ),满足交会任务需求。     

高精度中小11径非球面修抛技术研究

为实现高精度中小口径非球面的加工，介绍了一种非球面修抛技术。基于Preston假设，将抛光过程描述成一个线性方程，计算得到材料的去除量与抛光时间、抛光压力和零件转速之间的函数关系。设计了整体修抛法和环带修抛法两种方法，在数控抛光的基础上，对口径为Ф117mm的凹抛物面和口径为Ф17mm凸双曲面进行修抛，修抛后非球面的面形精度PV值为0．184μm，RMS均小于0．032μm，达到了工程化应用要求，实现了中小口径非球面的高精度加工。     

Atomic‐Level Alloying and De‐alloying in Doped Gold Nanoparticles

Atomically precise alloying and de‐alloying processes for the formation of Ag–Au and Cu–Au nanoparticles of 25‐metal‐atom composition (referred to as Ag_xAu_25?x(SR)₁₈ and Cu_xAu_25?x(SR)₁₈, in which R=CH₂CH₂Ph) are reported. The identities of the particles were determined by matrix‐assisted laser desorption ionization mass spectroscopy (MALDI‐MS). Their structures were probed by fragmentation analysis in MALDI‐MS and comparison with the icosahedral structure of the homogold Au₂₅(SR)₁₈ nanoparticles (an icosahedral Au₁₃ core protected by a shell of Au₁₂(SR)₁₈). The Cu and Ag atoms were found to preferentially occupy the 13‐atom icosahedral sites, instead of the exterior shell. The number of Ag atoms in Ag_xAu_25?x(SR)₁₈ (x=0–8) was dependent on the molar ratio of Ag^I/Au^III precursors in the synthesis, whereas the number of Cu atoms in Cu_xAu_25?x(SR)₁₈ (x=0–4) was independent of the molar ratio of Cu^II/Au^III precursors applied. Interestingly, the Cu_xAu_25?x(SR)₁₈ nanoparticles show a spontaneous de‐alloying process over time, and the initially formed Cu_xAu_25?x(SR)₁₈ nanoparticles were converted to pure Au₂₅(SR)₁₈. This de‐alloying process was not observed in the case of alloyed Ag_xAu_25?x(SR)₁₈ nanoparticles. This contrast can be attributed to the stability difference between Cu_xAu_25?x(SR)₁₈ and Ag_xAu_25?x(SR)₁₈ nanoparticles. These alloyed nanoparticles are promising candidates for applications such as catalysis.     

双一流背景下有机化学精准教学的探究实践*

有机化学课程是本校化学师范和高分子材料与工程2个国家级一流本科专业以及应用化学、制药工程等专业基础必修课程。由于化学师范和非师范专业的培养目标不同,有机化学的精准教学方面也有所差异。主要从理论教学、实验教学和多媒体教学等3个方面对化学师范专业和非师范专业有机化学差异化精准教学进行了探究实践,化学师范专业有机化学的精准教学侧重于培养学生的教学能力,非师范专业有机化学的精准教学侧重于培养学生的应用能力。     

Controlling the Surface Functionalization of Ultrasmall Gold Nanoparticles by Sequence-Defined Macromolecules

Ultrasmall gold nanoparticles (diameter about 2 nm) were surface-functionalized with cysteine-carrying precision macromolecules. These consisted of sequence-defined oligo(amidoamine)s (OAAs) with either two or six cysteine molecules for binding to the gold surface and either with or without a PEG chain (3400 Da). They were characterized by ¹H NMR spectroscopy, ¹H NMR diffusion-ordered spectroscopy (DOSY), small-angle X-ray scattering (SAXS), and high-resolution transmission electron microscopy. The number of precision macromolecules per nanoparticle was determined after fluorescent labeling by UV spectroscopy and also by quantitative ¹H NMR spectroscopy. Each nanoparticle carried between 40 and 100 OAA ligands, depending on the number of cysteine units per OAA. The footprint of each ligand was about 0.074 nm² per cysteine molecule. OAAs are well suited to stabilize ultrasmall gold nanoparticles by selective surface conjugation and can be used to selectively cover their surface. The presence of the PEG chain considerably increased the hydrodynamic diameter of both dissolved macromolecules and macromolecule-conjugated gold nanoparticles.     

Localization microscopy (SPDM) facilitates high precision control of lithographically produced nanostructures

Nanoscale resolution in material sciences is usually restricted to scanning electron beam microscopes. Here we present a procedure that allows single molecule resolution of the sample surface with visible light. Highlighting the performance we used electron beam lithography to generate highly regular nanostructures consisting of interconnected cubes. The samples were labeled with Alexa 647 dyes. The spatial organization of the dyes on nanostructured surfaces was localized with single molecule resolution using localization microscopy. This succeeded also in an absolute spatial calibration of the localization method applied (spectral precision distance microscopy/SPDM). The findings will contribute to the field of product control for industrial applications and long-term fluorescence imaging.     

编码器动态检测系统高实时性高精度角度基准设计

在编码器动态特性检测中,角度基准的快速反应和精度直接影响着动态特性检测装置的准确性。为实现角度基准的快速响应,提高基准编码器的测角精度,本文设计了高精度快速细分角度基准编码器。首先,通过对目前角度基准不足对编码器动态特性检测影响的分析,得出动态检测精度主要受基准编码器的数据处理延时影响。其次,通过对基准编码器结构、细分电路、处理电路等的设计,完成了23位高实时性角度基准编码器的制作。最后,为提高检测精度,利用RBF神经网络对角度基准进行误差补偿。所设计的角度基准编码器分辨率达到0.15",并且可以在10 r/s速度时,保证逐分辨率输出。经过测量,补偿前基准编码器的精度为1.30",补偿后的基准编码器误差峰峰值不超过2.5",精度优于0.6"。高精度、高实时性角度基准编码器的研制,提高了编码器动态特性检测系统的检测精度,为研究编码器动态特性提供了基础。     

天文/卫星组合点校捷联惯性导航系统算法研究

捷联式惯性导航系统通常采用卫星导航系统的位置、速度信息对惯导解算误差进行校正,但对于水下载体惯性导航系统而言,由于只能获得点位置信息,对惯导的校正精度以及校正参量有限。针对上述问题,提出了基于天文/卫星组合校正捷联式惯导技术,通过卫星精确定位信息和天文快速观测信息,全面修正惯导系统误差、提高导航精度。仿真结果表明,基于天文/卫星组合校正算法对惯导进行校正,相对于传统校正算法精度可提高约50%。